Challenges Faced While Using Conventional Adhesives and Epoxies

The adhesives and epoxies used a few decades back seemed inefficient. Their results on different types of surfaces were not the same. As a result, manufacturers had to come up with better and advanced formulas.

 TL;DR: Issues with Conventional Adhesives and Epoxies

  • Conventional formulas lacked durability, making them a less preferred solution.
  • Older adhesives and epoxies used to take up days to dry, halting the operations.
  • Outdated formulas cannot bond or repair metal and rubber surfaces due to their smooth structure.
  • ITW Performance Polymers offers modern adhesives and epoxies to address these concerns.

Adhesives and epoxies are mandatory compounds found in every industrial premise. Manufacturing units, warehouses, and installation repair companies use modern adhesives and epoxy for aluminum, rubber, concrete, etc. These products support industrial operations and consistency. However, there was a time when these compounds failed to serve their purpose. Conventional formulas were not efficient enough to address problems.

Check out this YouTube video for more details.

 
 
Why were conventional adhesives and epoxies a problem?

Here's how industries struggled with inappropriate adhesive and epoxy formulas.
 

 
  • Durability Concerns:

Conventional adhesives and epoxies were able to create a bond, but their strength and durability were in question. Outdated formulas could not withstand exposure or continuous wear and tear. As a result, the bond couldn't last longer, and the joint comes apart again.

On the other hand, modern formulas and solutions redefined durability. The bonds became stronger and can resist water, moisture, and light exposure. As a result, it became easier for industrialists to switch to these options.

 Buy these products here!

  • Downtime-Related Problems:

Industrials and employees working for more than 2-3 decades can recall the time of repair and maintenance. Whenever the adhesive or epoxy was applied to the surface, they had to pause the industrial operations. Everyone had to wait until the bond solidified and became operable.

Modern adhesive and epoxy formulas, like MMA adhesive, are better and require less downtime. The compound dries up in a few hours, making the part operable again soon. It does not halt industrial operations for a long time.

 


  • Smooth Surface-Related Issues:

Rubber and metals were hard to handle a few decades back. The broken parts were unrepairable due to their smooth surfaces. Replacing it with a new part seemed the only solution.

Modern adhesives and epoxies are ideal for smooth rubber and metal surfaces, too. They do not slip away, but create a strong bond, making these parts last longer. Therefore, advanced epoxies and adhesives receive more appreciation from industrialists and businesses.

 Shop for these adhesives now!

 About ITW Performance Polymers:

ITW Performance Polymers is a recognized distributor with an excellent product collection. Industries and companies can switch to modern formulas, like metal adhesive, rubber repair adhesive, concrete epoxy, etc., from this store. The collection involved a solution for every surface and material. So, check it out now!

Find out more at https://itwperformancepolymers.com/

Contact: (978) 774-0516

Email: cs@itwpp.com

Comments

Post a Comment

Popular posts from this blog

Understanding the Safety Tips while working with Industrial Adhesives

Image
Are you looking for a high-performance industrial adhesive but unsure about the safety precautions you need to take to prevent any mishaps? If this is your concern, then you are in the right place! By reading this article, you will learn all the essential safety tips to keep in mind while working with industrial adhesives. So, without further delay, let’s start exploring it in more detail.  Ensure Proper Ventilation Did you know that exposure to fumes and vapors can pose serious health complications? You must be well aware of maintaining a good ventilation system to ensure no build-up of harmful fumes in your workplace. You can use fans and effective exhaust systems to improve the circulation of air and reduce the harmful effects of the chemicals emitted by these adhesives. Avoid Contact with Skin and Eyes While using industrial adhesives , it is essential to avoid contact with the skin and eyes, as it can cause irritation and discomfort. Make sure to cover your ey...
Read more

How to Choose the Right Epoxy for Your Project

Image
Concrete epoxy adhesive is the most reliable and versatile bonding material for industrial repairs. However, not all epoxies are equal. Hence, choosing the right one for your project is essential. Here’s your simple guide to selecting an appropriate epoxy for your project.  Know your materials Firstly, identify the materials you are bonding. Epoxy works wonderfully on metals, glass, ceramics, wood, and concrete. However, some formulations are suitable for specific materials. For instance, high-strength industry-grade epoxy is ideal for bonding metals. To bond plastics, look for epoxy specifically for thermoplastics or thermosets. Understand the environment Where will you use the bonded product? Will you expose it to moisture, extreme conditions, or chemicals? Epoxy varies in resistance to water, corrosion, and heat. For instance, marine-grade epoxy perfectly holds up in wet or submerged conditions. In contrast, the heat-resistant epoxy is vital for engine componen...
Read more

Effective Metal Repairs: How to Use Metal-Filled Epoxy Correctly

Image
Metal-filled epoxy is a repair material that works well on metal parts like brass, aluminium and steel. It is available in two parts: the epoxy resin and a hardener. When you mix them, they form a strong, solid material that sticks well to metal surfaces.  You can use the metal patch and fill compound epoxy to fix cracks, holes, broken metal parts, or leaking pipes. Let's understand how metal-filled epoxies work and why they are a significant option for repairing metal surfaces. Uses of Metal-Filled Epoxies: Metal-filled epoxy can be used in many things, including:  It can be used to fill cracks and holes in surfaces to restore them. To prevent and repair corrosion in metal surfaces. To repair broken machine parts or other industrial components, metal-filled epoxy can be used. So, these are some common uses of metal-filled epoxy. Further, if you want to buy a metal-filled epoxy or methacrylate adhesive , check these factors and their uses. If it provides these, it w...
Read more