Five Factors that Matter when Choosing an Industrial Adhesive

If you’re shopping for industrial adhesives, several factors need consideration. You cannot simply pick one that helps stick two surfaces. In fact, choose an efficient adhesive that sticks longer and is budget-friendly for your pocket. Once you select the wrong adhesive, it may lead to bond failure in the future or require rework. So, consider these factors when choosing an industrial adhesive.

Head to for additional information.

• Compatibility with the surface:

Firstly, you must check the surfaces that you’re trying to bond. Is it aluminum, glass, any other metal, or composites? Understand that some materials may require adequate surface preparation. Meanwhile, others may not need it. Therefore, if the adhesive and the surface aren’t compatible enough, you cannot stick them together.

Want to explore more? Check this website.

• Bond strength:

There are three types of bond strength: Peel, shear, and tensile. Now, it is not necessary that you need an adhesive with all these strengths. Sometimes, there may be a requirement for an adhesive to simply hold components together. Meanwhile, other surfaces may require a strong bond to withstand forces. So, understand the bonding requirement first.

For more information, visit this page.

• Environment:

The place where you’re bonding the material also makes a huge difference. You must understand that various temperatures and weather have different effects on the adhesive bond. Perhaps an adhesive that stays intact in an indoor environment may not be the same in external factors. Therefore, always think of the worst-case conditions before buying an epoxy for aluminum or other surfaces.

  

• Cure time and process:

The time taken to cure the surface with an adhesive also impacts your manufacturing speed. So, you can choose an adhesive that cures faster yet doesn’t limit working time. Moreover, you should ensure to check your equipment and process constraints while choosing an adhesive.

 

 

• Need for surface preparation:

You may find surfaces that may not require excessive preparation. Meanwhile, others may need adequate cleaning, abrasion, and chemical treatment. Moreover, you should focus on the method of adhesive application. Is it spray, roll-coat, or film lamination? Find the best methotrexate adhesive or metal epoxies at ITW Performance Polymers.

Key takeaways:

• Always check the surface compatibility of an adhesive before choosing one.
• Choose from peel, sheer, or tensile bond strength of the adhesive.
• Consider the indoor or outdoor environment of the metal before choosing an adhesive.
• Examine the time taken to cure the surface with an adhesive.
• Determine if the surface needs little or excessive preparation pre-application.

To get more details, visit https://itwperformancepolymers.com/